IoT Modules, IoT Wireless, Radio Modules, ASK/FSK Receiver, ASK/FSK Transmitter, Bidirectional Remote Control, Transceiver Module, FSK Module, Radio module miniaturized, CC1310, CC1312R, S2LP, CC1352R, CC2640A, CC1352P,Capacitive Rain Sensor
- Radio Modem with AT Command (Transparent Transmission Protocol)
The RF modem is very simple to use and provides a wireless RS232 link with a RF data rate of up to 200kbps (2-GFSK modulation).
The module can work also in Long Range Mode (LRM) with a RF data rate egual to 2.5kbps.
The transceivers has the functions of a complete radio modem and simply require CMOS/TTL data at the transmit input and the corresponding transceiver(s) output
the same data. Preamble and CRC are automatically generated and added to the RF transmission.
- Over The Air Command (OTA Command)
The module has the ability to manage No. 4 digital outputs and No. 4 digital inputs both locally and remotely (OTA Command) by sending simple AT commands.
- ALARM Functionality
With this function, when a digital input change status (DEVICE A) a message will be transmitted via UART to the DEVICE B : “Alarm_0_1
- Remote I/O Functionality
This is two-way transmission used in the field automatic control. It is possible Turn ON and turn OFF the remote IO mirroring function.
When we enable the Remote I/O function, if any Digital Input is change on the Station A, the digital output of the remote Station B will also mirror these states at the same time.
When the system operates normally is HIGH
When the system is in Sleep mode is LOW
When will use Factory Reset this will flash
- Factory Reset Low Active
After pull down this pin, and then powering ON again the pin 7 (STATUS) will flash 5 times and then stay on, means that the factory reset has been restored.
The Evaluation KIT
N. 2 Evaluation Board with SMA Antenna
N. 2 USB Cables
Radiocontrolli SRL Via Santagata 73 Santa Maria C.V. (CE) ITALY